~Toughbooktalk~

It appeared to, I can actually move it lol. Now if I can only get the freaking wifi and sound to work... lol
It actually even restarted with out hanging up and not sure HOW that was fixed..

I was on my other computer looking at MX-15. Since the installs seemed to have less issues, I was debating on weather to install it or not. I have nothing on this other than the OS so I do not have to worry about deleting anything important. I was confused on the PAE and Non-PAE however. I am guessing non PAE? since the tbs cannot run 64gbs ram (lol would be nice).

AR

It would be nice but with maximum 1.5 to 2 Gbs ram there is no point.

One thing I noticed is that your first post where it says 686 kernel??? MX14.4 and 15 use 586 kernels for the Antix old timers. MK 3 and before use 386. One Youtube guy pronounced Antix "anteeks" ...very fitting. I have found that a PAE OS loaded in a MK4/5 runs fine on a MK1 CF-29. My one SSD caddy will play in any CF-29.

The point is the system checks for PAE on install not on normal usage.

My recommendation is MX15 non-pae and get your speed up with a techtuff adapter and SSD. 14 second boot. FYI your MK5 will play with PAE. NOT 64 bit. 32 bit is faster and a better match for available ram and the machine as a whole. Trying not to confuse you more than you already are.

Welcome to the Linux section and TBT by the way.

I have the download of MX-15 going while going to see a movie. I'll check when I get back if it works better lol.

Another double post but it's my forum (I started it) so......

Some Linux distros install with sound muted. I don't know what brain surgeon thought that up.

Bottom line is I see a lot of Mint 17.3 issues on the Google. Especially the latest kernel. And I started with Mint 8......got coerced into Ubuntu then went crazy with Debian knock-offs.

Maybe kodeniner could help....though he is a pure Debian fanatic. (Teasing here, Linux is his business and he has my total respect)

All right I'll try this....The Linux distro folks are like the world in general...they want to protect us from ourselves. Or maybe it's they want to put a system online that has no problems...and no negative feedback. So the locks are tightened and information is hard to get.

This is my opinion and comments are welcome from anyone. Just be nice.

You have a second machine it appears, download MX-15 and try it on a USB stick. If you no likey try something else. Free is as cheap as it gets.

Dinner at the ranch. (I'm the cook)

TDR-HQ

Sadlmkr wrote:Another double post but it's my forum (I started it) so......

Some Linux distros install with sound muted. I don't know what brain surgeon thought that up.

Bottom line is I see a lot of Mint 17.3 issues on the Google. Especially the latest kernel. And I started with Mint 8......got coerced into Ubuntu then went crazy with Debian knock-offs.

Maybe kodeniner could help....though he is a pure Debian fanatic. (Teasing here, Linux is his business and he has my total respect)

All right I'll try this....The Linux distro folks are like the world in general...they want to protect us from ourselves. Or maybe it's they want to put a system online that has no problems...and no negative feedback. So the locks are tightened and information is hard to get.

This is my opinion and comments are welcome from anyone. Just be nice.

You have a second machine it appears, download MX-15 and try it on a USB stick. If you no likey try something else. Free is as cheap as it gets.

Dinner at the ranch. (I'm the cook)

TDR-HQ

Ok after having to get MX-14 since the .iso for 15 will NOT read.. smh.. I tried booting form usb lol no such luck there, all it say is the os is not availble.. however figured out how to make it boot from usb in the bios . The wifi sound and the restart hanging up still seems to be happening still.. blah...

The sound may have been muted in Microsoft. For whatever reason it needs to be un-muted in M$. This works both ways. Muted in Linux stays muted in M$.

This is a place where power pull reset might work. Pull all power and hold the key down until your finger gets tired. Clears the stupid from the mobo. On restart [F2] to bios [F9][F10]yes to save. (Shorthand for setting bios to defaults)

With two little screwdrivers you can un-plug the cmos battery. One through hdd door and one through pc door. Again hold switch down to clear residuals. As long as you don't move the plug too far it will WANT to be plugged back in due to the set the wires have taken. FYI

Use left hand screwdriver to steady the plug, use right hand one in a rotating motion in the slot that the connectors form. If all else fails pull the bottom off re-plug and squish the thermal pads while you are in there.

Ummm you do have a speaker in there, yes? Any sound in headset jack.

Is pulse audio installed?

Use MX-14 package installer. O.K. it's not installed. Just checked my 53A.

For menu ala Windows Key (surrender flag) here are the steps.

From desktop right click applications- settings- keyboard
application- Shortcuts
+Add
open wait a minute and scroll to xfce4-popup-whiskermenu {Open}
OK
tap windows key (should say Super L)

WIFI

Send output of:
Sound

Send output of:
To be honest I don't understand output from iwlist eth1 scan. Are you using a cell phone as a wireless router? Not that it is wrong I have just not seen that output before.

Thanks,

Jeff...ignorance is bliss cattle company...

EDIT WON'T WORK....SEE END OF NEXT POST. END EDIT

I must be running on 512 Mb ram. This is from USB drive with xset m 8 1 and my menu tweak. Sound is fine with no changes. Listening to Willie and typing I need to add a stick of ram. CF-29MK5 1800 hours. OSDisk.com boughten from antiX. MX14.4 32 bit. (Stick is 32Gb of polished aluminum.)
demo@mx1:~
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.14.15-2~bpo70+1 (2014-08-21)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f6e0000-0x000000001f6edfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f6ee000-0x000000001f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Matsushita Electric Industrial Co.,Ltd. CF-29NTQGZBM/CF29-5, BIOS V5.00L14 08/03/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f1fffff]
[ 0.000000] [mem 0x1f000000-0x1f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1effffff]
[ 0.000000] [mem 0x1c000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f6dffff]
[ 0.000000] [mem 0x1f200000-0x1f5fffff] page 2M
[ 0.000000] [mem 0x1f600000-0x1f6dffff] page 4k
[ 0.000000] BRK [0x0174d000, 0x0174dfff] PGTABLE
[ 0.000000] BRK [0x0174e000, 0x0174ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f24e000-0x1f6dffff]
[ 0.000000] ACPI: RSDP 000f6840 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 1f6e604a 000040 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1f6ede78 000084 (v02 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: DSDT 1f6e68d0 0075A8 (v01 MATBIO CF29-5 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f6eefc0 000040
[ 0.000000] ACPI: APIC 1f6edefc 000062 (v01 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: BOOT 1f6edfd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 1f6edf9c 00003C (v01 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: SSDT 1f6e6487 0002B9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1f6e62a9 0001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 1f6e608a 00021F (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f6e0000
[ 0.000000] low ram: 0 - 1f6e0000
[ 0.000000] BRK [0x01750000, 0x01750fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f6dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f6dffff]
[ 0.000000] On node 0 totalpages: 128638
[ 0.000000] free_area_init_node: node 0, pgdat c160a500, node_mem_map dee5e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 974 pages used for memmap
[ 0.000000] Normal zone: 124640 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dee3e000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127632
[ 0.000000] Kernel command line: quiet antiX=LX
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 497748K/514552K available (4477K kernel code, 404K rwdata, 1368K rodata, 552K init, 584K bss, 16804K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xdfee0000 - 0xff9fe000 ( 507 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
[ 0.000000] .init : 0xc161d000 - 0xc16a7000 ( 552 kB)
[ 0.000000] .data : 0xc145f808 - 0xc161c100 (1778 kB)
[ 0.000000] .text : 0xc1000000 - 0xc145f808 (4478 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=de806000 soft=de808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.146 MHz processor
[ 0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.29 BogoMIPS (lpj=6384584)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.004046] ACPI: Core revision 20131218
[ 0.010238] ACPI: All ACPI Tables successfully acquired
[ 0.012049] Security Framework initialized
[ 0.012075] AppArmor: AppArmor disabled by boot time parameter
[ 0.012078] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012111] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.012114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.012468] Initializing cgroup subsys memory
[ 0.012480] Initializing cgroup subsys devices
[ 0.012484] Initializing cgroup subsys freezer
[ 0.012489] Initializing cgroup subsys net_cls
[ 0.012493] Initializing cgroup subsys blkio
[ 0.012496] Initializing cgroup subsys perf_event
[ 0.012533] Disabled fast string operations
[ 0.012544] mce: CPU supports 5 MCE banks
[ 0.012556] CPU0: Thermal monitoring enabled (TM2)
[ 0.012580] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.012580] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.012580] tlb_flushall_shift: 6
[ 0.022689] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062793] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[ 0.064000] Performance Events: p6 PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 32
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 00000000ffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 0000000000000003
[ 0.064000] x86: Booted up 1 node, 1 CPUs
[ 0.064000] smpboot: Total of 1 processors activated (3192.29 BogoMIPS)
[ 0.064000] devtmpfs: initialized
[ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064000] PM: Registering ACPI NVS region [mem 0x1f6ee000-0x1f6fffff] (73728 bytes)
[ 0.064000] pinctrl core: initialized pinctrl subsystem
[ 0.064000] NET: Registered protocol family 16
[ 0.064000] cpuidle: using governor ladder
[ 0.064000] cpuidle: using governor menu
[ 0.064000] ACPI: bus type PCI registered
[ 0.064000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.064000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064000] PCI: Using MMCONFIG for extended config space
[ 0.064000] PCI: Using configuration type 1 for base access
[ 0.065173] bio: create slab <bio-0> at 0
[ 0.065307] ACPI: Added _OSI(Module Device)
[ 0.065310] ACPI: Added _OSI(Processor Device)
[ 0.065313] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.065316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180057] ACPI: Interpreter enabled
[ 0.180095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.180102] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.180123] ACPI: (supports S0 S3 S4 S5)
[ 0.180126] ACPI: Using IOAPIC for interrupt routing
[ 0.180173] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.185870] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.304369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304380] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304388] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.305212] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.305216] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.305221] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.305226] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.305229] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.305233] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.305237] acpi PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.305241] acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.305245] PCI: root bus 00: using default resources
[ 0.305501] PCI host bridge to bus 0000:00
[ 0.305506] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.305510] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.305514] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.305528] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.305679] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.305693] pci 0000:00:02.0: reg 0x10: [mem 0xb0080000-0xb00fffff]
[ 0.305702] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.305710] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.305718] pci 0000:00:02.0: reg 0x1c: [mem 0xb0000000-0xb003ffff]
[ 0.305855] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.305866] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x0007ffff]
[ 0.306034] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.306124] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.306203] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.306288] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.306335] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.306468] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.306515] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.306645] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.306692] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.306833] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.306856] pci 0000:00:1d.7: reg 0x10: [mem 0xb0040000-0xb00403ff]
[ 0.306949] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.307079] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.307247] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.307264] pci 0000:00:1e.2: reg 0x10: [io 0x1c00-0x1cff]
[ 0.307275] pci 0000:00:1e.2: reg 0x14: [io 0x18c0-0x18ff]
[ 0.307286] pci 0000:00:1e.2: reg 0x18: [mem 0xb0040800-0xb00409ff]
[ 0.307297] pci 0000:00:1e.2: reg 0x1c: [mem 0xb0040400-0xb00404ff]
[ 0.307346] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.307470] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[ 0.307487] pci 0000:00:1e.3: reg 0x10: [io 0x2400-0x24ff]
[ 0.307498] pci 0000:00:1e.3: reg 0x14: [io 0x2000-0x207f]
[ 0.307562] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.307673] pci 0000:00:1e.3: System wakeup disabled by ACPI
[ 0.307757] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.307843] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.307854] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.307861] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.307867] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.307986] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.308005] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.308016] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.308027] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.308037] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.308048] pci 0000:00:1f.2: reg 0x20: [io 0x1890-0x189f]
[ 0.308090] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.308215] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.308273] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.308529] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
[ 0.308557] pci 0000:02:00.0: reg 0x10: [mem 0xb4000000-0xb4003fff 64bit]
[ 0.308572] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff]
[ 0.308621] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.308700] pci 0000:02:00.0: supports D1 D2
[ 0.308703] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308801] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.308814] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.308820] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.308826] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.308834] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.308927] pci 0000:06:01.0: [1180:0476] type 02 class 0x060700
[ 0.308946] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.308950] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.308966] pci 0000:06:01.0: reg 0x10: [mem 0xb8000000-0xb8000fff]
[ 0.308998] pci 0000:06:01.0: supports D1 D2
[ 0.309002] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309104] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500
[ 0.309125] pci 0000:06:01.1: reg 0x10: [mem 0xb8002000-0xb80020ff]
[ 0.309211] pci 0000:06:01.1: supports D1 D2
[ 0.309214] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309320] pci 0000:06:02.0: [8086:4223] type 00 class 0x028000
[ 0.309342] pci 0000:06:02.0: reg 0x10: [mem 0xb8003000-0xb8003fff]
[ 0.309432] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 0.309558] pci 0000:00:1e.0: PCI bridge to [bus 06-08] (subtractive decode)
[ 0.309566] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.309574] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.309580] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.309651] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-08] (conflicts with (null) [bus 06-08])
[ 0.309659] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 0.309679] pci_bus 0000:00: on NUMA node 0
[ 0.312533] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.312617] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 0.312698] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 0.312780] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.312861] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 0.312942] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.313022] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 0.313105] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[ 0.341099] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.341210] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.341362] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.341368] vgaarb: loaded
[ 0.341370] vgaarb: bridge control possible 0000:00:02.0
[ 0.341439] PCI: Using ACPI for IRQ routing
[ 0.349909] PCI: pci_cache_line_size set to 64 bytes
[ 0.349964] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.349968] e820: reserve RAM buffer [mem 0x1f6e0000-0x1fffffff]
[ 0.350329] hpet clockevent registered
[ 0.350334] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.350340] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.350346] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.352051] Switched to clocksource hpet
[ 0.355473] pnp: PnP ACPI init
[ 0.355504] ACPI: bus type PNP registered
[ 0.362083] system 00:00: [mem 0x000cf200-0x000cf7ff] has been reserved
[ 0.362088] system 00:00: [mem 0x000d0800-0x000d3fff] has been reserved
[ 0.362094] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.363644] system 00:01: [io 0x0900-0x091f] has been reserved
[ 0.363649] system 00:01: [io 0x092c-0x097f] has been reserved
[ 0.363654] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.363658] system 00:01: [io 0x0920-0x092b] has been reserved
[ 0.363663] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.363668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373179] system 00:02: [io 0x02e0-0x02e7] has been reserved
[ 0.373184] system 00:02: [io 0x0330-0x0337] has been reserved
[ 0.373189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373210] pnp 00:03: [dma 4]
[ 0.373256] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.373311] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.373470] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.373539] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.373703] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.373708] system 00:07: [io 0x1000-0x107f] could not be reserved
[ 0.373713] system 00:07: [io 0x1180-0x11bf] has been reserved
[ 0.373718] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.373722] system 00:07: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.373727] system 00:07: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.373733] system 00:07: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.373737] system 00:07: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.373742] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.373746] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.373751] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373867] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373932] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.374836] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.376729] pnp 00:0b: Plug and Play ACPI device, IDs FJC6000 PNP0f13 (active)
[ 0.389513] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.423481] pnp 00:0d: [irq 0 disabled]
[ 0.423486] pnp 00:0d: [dma 0 disabled]
[ 0.429698] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.434097] pnp: PnP ACPI: found 14 devices
[ 0.434100] ACPI: bus type PNP unregistered
[ 0.434106] PnPBIOS: Disabled by ACPI PNP
[ 0.471846] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471851] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471858] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06-08] add_size 1000
[ 0.471864] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471870] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-08] add_size 4000000
[ 0.471879] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.471886] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471890] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.471901] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.471906] pci 0000:00:02.1: BAR 0: assigned [mem 0x24000000-0x2407ffff]
[ 0.471915] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.471921] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[ 0.471926] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.471931] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.471938] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.471944] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.471955] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471959] pci 0000:06:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.471964] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471967] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471972] pci 0000:06:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.471979] pci 0000:06:01.0: BAR 16: assigned [mem 0xbc000000-0xbfffffff]
[ 0.471983] pci 0000:06:01.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.471987] pci 0000:06:01.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.471992] pci 0000:06:01.0: CardBus bridge to [bus 07]
[ 0.471995] pci 0000:06:01.0: bridge window [io 0x4000-0x40ff]
[ 0.472002] pci 0000:06:01.0: bridge window [io 0x4400-0x44ff]
[ 0.472012] pci 0000:06:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.472019] pci 0000:06:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.472025] pci 0000:00:1e.0: PCI bridge to [bus 06-08]
[ 0.472029] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.472036] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.472042] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.472051] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.472055] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.472059] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.472062] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
[ 0.472066] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.472070] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.472074] pci_bus 0000:06: resource 1 [mem 0xb8000000-0xb80fffff]
[ 0.472078] pci_bus 0000:06: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.472081] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.472085] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.472089] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
[ 0.472092] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
[ 0.472096] pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.472100] pci_bus 0000:07: resource 3 [mem 0xbc000000-0xbfffffff]
[ 0.472150] NET: Registered protocol family 2
[ 0.472398] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.472419] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.472449] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.472477] TCP: reno registered
[ 0.472480] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.472491] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.472574] NET: Registered protocol family 1
[ 0.472599] pci 0000:00:02.0: Boot video device
[ 0.473355] PCI: CLS 32 bytes, default 64
[ 0.473435] Unpacking initramfs...
[ 0.640891] Freeing initrd memory: 4680K (df24e000 - df6e0000)
[ 0.641054] Simple Boot Flag at 0x41 set to 0x1
[ 0.641222] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.641354] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.641822] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.641940] audit: initializing netlink subsys (disabled)
[ 0.641978] audit: type=2000 audit(1459183786.640:1): initialized
[ 0.662486] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.662590] VFS: Disk quotas dquot_6.5.2
[ 0.662622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.662729] msgmni has been set to 981
[ 0.663080] alg: No test for stdrng (krng)
[ 0.663107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.663148] io scheduler noop registered
[ 0.663151] io scheduler deadline registered
[ 0.663160] io scheduler cfq registered (default)
[ 0.663458] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.663606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.663640] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.663719] intel_idle: does not run on family 6 model 13
[ 0.663793] GHES: HEST is not enabled!
[ 0.663818] isapnp: Scanning for PnP cards...
[ 1.016966] isapnp: No Plug & Play device found
[ 1.017071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.037668] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.038505] Linux agpgart interface v0.103
[ 1.038631] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.038653] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.039609] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.039794] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.040096] i8042: PNP: PS/2 Controller [PNP0303:K101,FJC6000:MOU2] at 0x60,0x64 irq 1,12
[ 1.041900] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.041910] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.042126] mousedev: PS/2 mouse device common for all mice
[ 1.042225] rtc_cmos 00:08: RTC can wake from S4
[ 1.042391] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.042421] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.042620] TCP: cubic registered
[ 1.042640] NET: Registered protocol family 10
[ 1.043003] mip6: Mobile IPv6
[ 1.043007] NET: Registered protocol family 17
[ 1.043013] mpls_gso: MPLS GSO support
[ 1.043183] Using IPI No-Shortcut mode
[ 1.043333] registered taskstats version 1
[ 1.043764] rtc_cmos 00:08: setting system clock to 2016-03-28 16:49:47 UTC (1459183787)
[ 1.043853] PM: Hibernation image not present or could not be loaded.
[ 1.044206] Freeing unused kernel memory: 552K (c161d000 - c16a7000)
[ 1.044257] Write protecting the kernel text: 4480k
[ 1.044309] Write protecting the kernel read-only data: 1372k
[ 1.044311] NX-protecting the kernel data: 3712k
[ 1.080086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.342262] ACPI: bus type USB registered
[ 1.343642] usbcore: registered new interface driver usbfs
[ 1.344610] usbcore: registered new interface driver hub
[ 1.346131] usbcore: registered new device driver usb
[ 1.348511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.430367] Floppy drive(s): fd0 is 1.44M
[ 1.640030] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 2.640086] Switched to clocksource tsc
[ 4.448037] floppy0: no floppy controllers found
[ 4.448052] work still pending
[ 4.494552] SCSI subsystem initialized
[ 4.500900] libata version 3.00 loaded.
[ 4.502444] ata_piix 0000:00:1f.2: version 2.13
[ 4.502591] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.513044] scsi0 : ata_piix
[ 4.515031] scsi1 : ata_piix
[ 4.515466] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
[ 4.515471] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
[ 4.680437] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
[ 4.696357] ata2.00: configured for UDMA/33
[ 9.552011] ata1: link is slow to respond, please be patient (ready=0)
[ 14.536011] ata1: device not ready (errno=-16), forcing hardreset
[ 19.732011] ata1: link is slow to respond, please be patient (ready=0)
[ 24.548011] ata1: SRST failed (errno=-16)
[ 29.744011] ata1: link is slow to respond, please be patient (ready=0)
[ 34.560011] ata1: SRST failed (errno=-16)
[ 39.756011] ata1: link is slow to respond, please be patient (ready=0)
[ 69.604011] ata1: SRST failed (errno=-16)
[ 74.632011] ata1: SRST failed (errno=-16)
[ 74.642701] ata1: reset failed, giving up
[ 74.644231] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 74.658020] uhci_hcd: USB Universal Host Controller Interface driver
[ 74.658245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 74.658259] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 74.658271] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 74.658322] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 74.658407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.658411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.658415] usb usb1: Product: UHCI Host Controller
[ 74.658418] usb usb1: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.658422] usb usb1: SerialNumber: 0000:00:1d.0
[ 74.659659] hub 1-0:1.0: USB hub found
[ 74.659677] hub 1-0:1.0: 2 ports detected
[ 74.659974] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 74.659984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 74.659993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 74.660077] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 74.660266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.660270] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.660274] usb usb2: Product: UHCI Host Controller
[ 74.660277] usb usb2: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.660281] usb usb2: SerialNumber: 0000:00:1d.1
[ 74.661422] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 74.661428] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 74.663751] hub 2-0:1.0: USB hub found
[ 74.663772] hub 2-0:1.0: 2 ports detected
[ 74.664120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 74.664130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 74.664143] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 74.664188] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 74.664285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.664289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.664292] usb usb3: Product: UHCI Host Controller
[ 74.664296] usb usb3: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.664299] usb usb3: SerialNumber: 0000:00:1d.2
[ 74.668554] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 74.669391] hub 3-0:1.0: USB hub found
[ 74.669412] hub 3-0:1.0: 2 ports detected
[ 74.701880] ehci-pci: EHCI PCI platform driver
[ 74.710530] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 74.710548] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 74.710570] ehci-pci 0000:00:1d.7: debug port 1
[ 74.714497] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 74.714540] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0040000
[ 74.724022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 74.724167] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 74.724171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.724175] usb usb4: Product: EHCI Host Controller
[ 74.724178] usb usb4: Manufacturer: Linux 3.14-0.bpo.2-686-pae ehci_hcd
[ 74.724182] usb usb4: SerialNumber: 0000:00:1d.7
[ 74.724783] hub 4-0:1.0: USB hub found
[ 74.724798] hub 4-0:1.0: 6 ports detected
[ 74.748152] hub 1-0:1.0: USB hub found
[ 74.748168] hub 1-0:1.0: 2 ports detected
[ 74.772144] hub 2-0:1.0: USB hub found
[ 74.772157] hub 2-0:1.0: 2 ports detected
[ 74.796146] hub 3-0:1.0: USB hub found
[ 74.796162] hub 3-0:1.0: 2 ports detected
[ 75.036030] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 75.338991] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[ 75.338997] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 75.339003] usb 4-1: Product: DataTraveler 3.0
[ 75.339006] usb 4-1: Manufacturer: Kingston
[ 75.339009] usb 4-1: SerialNumber: 50E549C6930FEF7059119E86
[ 75.344751] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 75.345347] scsi2 : usb-storage 4-1:1.0
[ 75.346388] usbcore: registered new interface driver usb-storage
[ 76.433428] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 77.433315] sd 2:0:0:0: [sda] 61457664 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 77.433927] sd 2:0:0:0: [sda] Write Protect is off
[ 77.433932] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 77.434553] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.434557] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.438052] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.438056] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.463457] sda: sda1
[ 77.466304] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.466309] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.466313] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 77.886972] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 77.894431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 77.939731] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 77.946786] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 77.972256] loop: module loaded
[ 77.977314] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 78.025845] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 78.049832] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 78.055871] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 78.057366] aufs 3.14-20140616
[ 78.057594] aufs test_add:293:mount[1253]: uid/gid/perm /live/linux 1000/1000/0755, 0/0/01777
[ 79.243654] random: nonblocking pool is initialized
[ 79.449683] systemd-udevd[1473]: starting version 204
[ 79.960955] tsc: Marking TSC unstable due to TSC halts in idle
[ 79.960976] ACPI: acpi_idle registered with cpuidle
[ 79.965540] Switched to clocksource hpet
[ 80.000888] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 80.039772] ACPI: Lid Switch [LID]
[ 80.039923] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 80.039931] ACPI: Power Button [PWRB]
[ 80.040083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 80.040087] ACPI: Power Button [PWRF]
[ 80.091087] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 80.091689] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 80.093484] ACPI: AC Adapter [AC] (on-line)
[ 80.229515] parport_pc 00:0d: reported by Plug and Play ACPI
[ 80.229583] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 80.298279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 80.335766] [drm] Initialized drm 1.1.0 20060810
[ 80.398869] Floppy drive(s): fd0 is 1.44M
[ 80.426135] ACPI: Battery Slot [BATA] (battery present)
[ 80.426466] input: Panasonic Laptop Support as /devices/virtual/input/input6
[ 80.453644] ACPI: Battery Slot [BATB] (battery absent)
[ 80.456451] thermal LNXTHERM:00: registered as thermal_zone0
[ 80.456456] ACPI: Thermal Zone [TZC] (48 C)
[ 80.476377] lib80211: common routines for IEEE802.11 drivers
[ 80.476383] lib80211_crypt: registered algorithm 'NULL'
[ 80.534749] intel_rng: FWH not detected
[ 80.777610] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 80.777710] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 80.778266] sky2: driver version 1.30
[ 80.778503] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 80.778563] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[ 80.778967] sky2 0000:02:00.0 eth0: addr 00:0b:97:b8:dc:98
[ 80.934045] cfg80211: Calling CRDA to update world regulatory domain
[ 81.045831] libipw: 802.11 data/management/control stack, git-1.1.13
[ 81.045838] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 81.047864] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 81.047871] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 81.052957] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 81.138908] sdhci: Secure Digital Host Controller Interface driver
[ 81.138914] sdhci: Copyright(c) Pierre Ossman
[ 81.158317] ipw2200 0000:06:02.0: firmware: direct-loading firmware ipw2200-bss.fw
[ 81.324964] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 81.327124] yenta_cardbus 0000:06:01.0: CardBus bridge found [10f7:8338]
[ 81.448416] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 81.464699] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0cb8, PCI irq 20
[ 81.464705] yenta_cardbus 0000:06:01.0: Socket status: 30000006
[ 81.464715] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 81.464720] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
[ 81.465725] excluding 0x4000-0x40ff 0x4400-0x44ff
[ 81.473308] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
[ 81.473314] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff:
[ 81.473318] excluding 0xb8000000-0xb800ffff
[ 81.473334] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 81.473338] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff:
[ 81.473356] excluding 0x20000000-0x23ffffff
[ 81.476755] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 11)
[ 81.477901] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 81.478907] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 81.479017] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 81.647450] intel8x0_measure_ac97_clock: measured 66754 usecs (3214 samples)
[ 81.647460] intel8x0: clocking to 48000
[ 81.652866] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 81.653527] [drm] Memory usable by graphics device = 256M
[ 81.654951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 81.654956] [drm] Driver supports precise vblank timestamp query.
[ 81.655093] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 81.679220] [drm] initialized overlay support
[ 81.826530] input: PS/2 Touchpad as /devices/platform/i8042/serio1/input/input9
[ 81.852214] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input7
[ 81.941888] fbcon: inteldrmfb (fb0) is primary device
[ 82.724317] Console: switching to colour frame buffer device 128x48
[ 82.730026] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 82.730029] i915 0000:00:02.0: registered panic notifier
[ 82.732029] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 83.197802] ppdev: user-space parallel port driver
[ 83.434073] floppy0: no floppy controllers found
[ 83.434093] work still pending
[ 83.472590] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 83.473603] excluding 0x170-0x177 0x1f0-0x1f7 0x2e0-0x2e7 0x330-0x337 0x370-0x37f
[ 83.474217] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 83.474645] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 83.474947] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 83.475448] clean.
[ 83.475470] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 83.476252] clean.
[ 83.476284] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 83.476291] excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xe0000-0xfffff
[ 83.476327] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 83.476348] clean.
[ 83.476368] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 83.476387] clean.
[ 83.476407] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 83.476972] clean.
[ 83.489760] iTCO_vendor_support: vendor-support=0
[ 83.491577] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 83.491636] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 83.492667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 83.587435] wl: module license 'MIXED/Proprietary' taints kernel.
[ 83.587442] Disabling lock debugging due to kernel taint
[ 88.012652] device-mapper: uevent: version 1.0.3
[ 88.012785] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 94.772595] sky2 0000:02:00.0 eth0: enabling interface
[ 94.776107] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 110.988434] fuse init (API version 7.22)
[ 292.400273] lib80211_crypt: registered algorithm 'TKIP'
[ 786.687068] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Try dmesg | grep input. Look for PC Speaker

I've seen the "no sound" before when installing Linux on several models of Toughbooks. The only way to get sound working after pulling out my hair was to start fresh, and install Panasonic fresh install of Windows using recovery disks. Then, unmute the sound and make sure it is working. Then, and only then, install a working Linux distro (such as MX 14, etc.).
I would NOT dual boot a CF-29, unless you are so inclined. Kudos on the suggestion above to get a TechTuff adaptor and add SSD. Yes, I have a CF-29 LTQGZBM sitting here

I'm back with a stick of ram and MX-14 on ssd. What a difference.

Is your speaker plugged in? I saw that once.
Thanks Cleve (UNCNDL1)

J'd