SSD IN A CF-30

Message

#1 Post by **toughasnails** » Thu Mar 10, 2011 3:36 am

For some time now I have been looking at SSD and finally got a new Intel X25-M SSDSA2M080G2GC 80GB SATA. . This 30 now starts up in 25 seconds and loads programs so fast .Before I installed it windows took about 45-50 seconds to start.....I can do a full restart in that time now If you are looking to add a SSD the first thing you should do is join this site http://thessdreview.com/Forums/forum.php . These guys are great and have a great guide http://thessdreview.com/ssd-guides/opti ... n-guide-2/ .There is a lot of SSD's on Ebay but you need to understand them first before you buy...G1, G2 , Trim ??
I started with a 80GB (74.4GB) and 10.6GB after updates and a few programs with 63.7 free. Awesome

#2 Post by **tomcat57** » Thu Mar 10, 2011 3:49 am

Note that the sata-1 interface is reducing performance,in comparison to the same ssd in my Thinkpad with a sata-2 interface
Your average 115MB/s
Mine 170MB/s
The throughput is still double a 7200rpm hard drive
My previous Seagate Momentus XT hybrid hard drive was rated @83mb/s btw

#3 Post by **toughasnails** » Thu Mar 10, 2011 4:07 am

I see what you mean. Is the MK2 and 3 sata-1 interface too ? Some where I have the test results from my old WD Black 320gb7200rpm drive....would like to compare them.

#4 Post by **tomcat57** » Thu Mar 10, 2011 4:19 am

What the model # of your old drive blair?
Most of the newest 7200rpm drives are around @ 62 MB/sec
And yes with ssd's we need to find out what sata Toughbooks use the -2 spec
There are cf-19/74/52/30 that might all be limited to -1

#5 Post by **toughasnails** » Thu Mar 10, 2011 4:32 am

tomcat57 wrote:What the model # of your old drive blair?

My old drive is a WD Scorpio Black WD3200BEKT

Western Digital Scorpio Black WD3200BEKT 320GB 7200 RPM 16MB Cache 2.5" SATA 3.0Gb/s Internal Notebook

#6 Post by **tomcat57** » Thu Mar 10, 2011 4:36 am

I checked on the most common wd 7200rpm drives and updated my post
you doubled your old drive throughput
And of course the access time is instant on ssd's ,that was why users went for the 7200rpm drives over the slower 5400

Oh and I paid $250 with tax for my Intel so it was more expensive that your your Intel lol

#7 Post by **toughasnails** » Thu Mar 10, 2011 4:49 am

All most half

, looking for the intel ssd toolbox software. Mine never came with it. Did you do a firmware update on the ssd ?

#8 Post by **tomcat57** » Thu Mar 10, 2011 5:32 am

That was a few days ago, I don't remember if I upgraded firmware
I have the ssd toolbox and the Optimiser is run and fine + the tuner
The opimizer states that the latest firmware must bbe on it to run ,and it completed whatever it does
My firmware listing looks different than yours
My drive may have been a later model ,I have the latest firmware,yours is out of date
2CV102M3 , and yours is 2CV102HD

Intel has the toolbox in there download area
Intel SSD Toolbox - v2.0.1.000.msi&lang=eng

Look for the firmware and retest after you optimize it

http://downloadcenter.intel.com/SearchR ... ilyId=3124

#9 Post by **toughasnails** » Thu Mar 10, 2011 3:34 pm

I just downloaded the toolbox and the updates. Hope to get to it this weekend....girlfriends got some stuff for me to do first

#10 Post by **toughasnails** » Fri Mar 11, 2011 4:05 am

Just did the firmware update. Here is the before and after results

~Toughbooktalk~

SSD IN A CF-30

SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30

Re: SSD IN A CF-30