~Toughbooktalk~

Hi
just picked up a used cf30, was advised by seller that it was a mk3. having now looked over more carefully, all is fine, but there are no markings on the bottom to say what mark it is. the only ref nuber is T1200Z.

any suggestions on how to find out?

Cheers
keith

Go into your BIOS and it will tell you your full model number and you can also determine your mk #. Just hit F2 as it boots.

Silver Trooper
thanks for that, will give it a go and see what pops out.

cheers
keith

Hi
my model number is CF-30CTQAZBM, how can i determin the mk from this?

kljw wrote:Hi
my model number is CF-30CTQAZBM, how can i determin the mk from this?

You have a:

Intel Core Duo L2400 1.66GHz (Centrino), 13.3" Touch XGA (1000 NIT), 512MB, 80GB, Intel 802.11a/b/g,WinXP, TPM1.2, Bluetooth, No Optical sold in North America.

Go here for more info: http://www.config.toughbook.com/pcsc/co ... tinued-all

Hi
thanks for that, there are a few thig different, in that i have 2gb ram, 160gb hard disk. but the rest seems th same.

but can you tell me what MARK it is, i.e mk1/3 ??

When you hit F2, look at the version of the BIOS that is installed, it will be the number next to the "V". If it starts with V5.XXX, you have a MK5, if it says V4.XXX, then it is a MK4.

Its a Mk-1

The first letter of the model number will tell you what mark it is:
EX: CF-30FTSADAM

CF-30C.....=MK1
CF-30F.....=MK2
CF-30K.....=MK3

same for the CF-19.

Hope this is useful to someone