Ador
Thanks for your input, I'm in no rush, the 07 brick and screen have been sitting around for months. One of those "Some Day" projects. You have a good week and let me know if you do find an extra replicator.
Stephen
CF-VDW07 help
Re: CF-VDW07 help
I am back home now, I will give it a look out in the shed tomorrow. I think I still have 5 port replicators. 4 desktop styles ones with cd drive and one car type with no drive. I would be willing to get rid of the desktops ones but want to take inventory first.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Re: CF-VDW07 help
ADOR,
Thanks, I didn't realize there was more than one replicator. If you can when you are out in the shed write down the model numbers of each I be interested in looking them up just so I know a little more about these. Thanks again for the help.
Stephen
Thanks, I didn't realize there was more than one replicator. If you can when you are out in the shed write down the model numbers of each I be interested in looking them up just so I know a little more about these. Thanks again for the help.
Stephen
Re: CF-VDW07 help
Here are the pictures showing some of my setup's. I found three regular docks, and got thinking I think I sold one a while back to someone else who needed one. I can get rid of one standard dock leaving me two so that will work. Plans later on is to leave one mounted into one car I have for OBD1 tuning on the fly for a project I am working on and data logging. The other dock is after market. I would be willing to get rid of the portable screen, one brick and one dock. That would leave me plenty for what I want to do with a spare brick.
Have to click the link, forum thinks the pictures are too big.
https://www.flickr.com/photos/safjist_nipnog/
One photo is of the plug i was talking about, it was used by a few cameras. Using that cord it has a usb male end, using a female x female usb adapter turns it into a external usb port.
Have to click the link, forum thinks the pictures are too big.
https://www.flickr.com/photos/safjist_nipnog/
One photo is of the plug i was talking about, it was used by a few cameras. Using that cord it has a usb male end, using a female x female usb adapter turns it into a external usb port.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Re: CF-VDW07 help
Ador,
Very interesting, I didn't realize anyone made a car mount of it but that's cool. Are the screen and keyboard (CF-VDL02 and CF-VKBL01), things that go with the CF-07 brick or just something different? Anyway if your willing to sell one of the port replicators let me know what you want and what you think shipping will be and we can work it out. Thanks for all your help, I love the Toughbooks and these orphans as just neat.
Stephen
Very interesting, I didn't realize anyone made a car mount of it but that's cool. Are the screen and keyboard (CF-VDL02 and CF-VKBL01), things that go with the CF-07 brick or just something different? Anyway if your willing to sell one of the port replicators let me know what you want and what you think shipping will be and we can work it out. Thanks for all your help, I love the Toughbooks and these orphans as just neat.
Stephen
Last edited by scmoore on Mon Jan 22, 2018 5:41 pm, edited 1 time in total.
Re: CF-VDW07 help
(CF-VDL02 and CF-VKBL01) is just the remote keyboard and touch screen. (they made a CF-VDL01 screen as well, it's smaller and lower resolution and used the older power plug) They will work with any toughbook. It's basically a remote cop car setup. With the toughbook in a dock in the back. I was going to use it on a project like it was as a permanent mount in the dash for GPS, Music and Misc.
On the CF-VKB01, they have a 02 Rubber keyboard and 03 newer emissive keyboard versions as well.
The 07 was the "wearable" toughbook.
http://www.pencomputing.com/frames/panasonic_07.html
http://www.planitroi.com/TBSpecs/cf07.pdf
I will sell one of the port replicators, one of the standard ones with the built in CD drive. I will get back with you shortly either here on PM or by your email, either way. The dock can be used in a car as well, just need a car charger. The other one is just a after market one.
On the CF-VKB01, they have a 02 Rubber keyboard and 03 newer emissive keyboard versions as well.
The 07 was the "wearable" toughbook.
http://www.pencomputing.com/frames/panasonic_07.html
http://www.planitroi.com/TBSpecs/cf07.pdf
I will sell one of the port replicators, one of the standard ones with the built in CD drive. I will get back with you shortly either here on PM or by your email, either way. The dock can be used in a car as well, just need a car charger. The other one is just a after market one.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Re: CF-VDW07 help
Just a few links to look at the basic parts of those screens and set up's so you can plan if you want one later on.
https://www.ebay.com/itm/Panasonic-CF-V ... UMS8x4lhCg
https://www.ebay.com/itm/Panasonic-CF-V ... SwR29ZNKx0
https://www.ebay.com/itm/Gamber-Johnson ... SwHxVW7H-F
My keyboard support is different as it has a screen holder made into it and the screen can fold down over the keyboard.
https://www.ebay.com/itm/Panasonic-CF-V ... xyOFRSKlIo
It takes two cables to make everything work right for the touchscreen, etc on this kind of set up. If not the screen just works like normal though a VGA feed.
https://www.ebay.com/itm/Panasonic-CF-V ... UMS8x4lhCg
https://www.ebay.com/itm/Panasonic-CF-V ... SwR29ZNKx0
https://www.ebay.com/itm/Gamber-Johnson ... SwHxVW7H-F
My keyboard support is different as it has a screen holder made into it and the screen can fold down over the keyboard.
https://www.ebay.com/itm/Panasonic-CF-V ... xyOFRSKlIo
It takes two cables to make everything work right for the touchscreen, etc on this kind of set up. If not the screen just works like normal though a VGA feed.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5
- Springfield
- Posts: 1512
- Joined: Wed Oct 07, 2009 9:19 pm
- Location: FL
Re: CF-VDW07 help
I have an extra dock (CF-VEB071W) for the CF-07 brick. Includes a CD (not DVD) drive. $25 shipped anywhere in USA, send me a PM with your email address if interested.
Also have a copy of Win FLP, a cut-down version of Win XP. Seems to run a bit better on these bricks with limited memory. With some effort you can also swap the miniature hard drives to an SSD with ZIF cable interface.
Also have a copy of Win FLP, a cut-down version of Win XP. Seems to run a bit better on these bricks with limited memory. With some effort you can also swap the miniature hard drives to an SSD with ZIF cable interface.
ToughBooks: CF-74 73 53 52 51 31 30 29 28 27 25 19 18 08 07 C1 C2 F9 H1 M32 M33 M34 R2 S10 T8 T5 T4 T2 U1 W2 Y2 VDW07 PDRC ...
GoBooks: VR-2, XR-1, IX-260+, IX-350
GoBooks: VR-2, XR-1, IX-260+, IX-350