Need CF-51 UXGA LCD
Posted: Sun May 24, 2015 10:57 pm
Cash or trade.
A picture of back of lcd if possible.
Price on a sliding scale. 0 to ?.
~Toughbooktalk~
The largest Toughbook discussion site on the net!
http://www.toughbooktalk.com/
Need CF-51 UXGA LCD
Page 1 of 2
Re: Need CF-51 UXGA LCD
Posted: Mon May 25, 2015 12:21 pm
Do you have a part number or what model # of 51 maybe. I have A and L part units maybe a screen only.
A picture of back of lcd if possible.
Price on a sliding scale. 0 to ?.
A picture of back of lcd if possible.
Price on a sliding scale. 0 to ?.
Re: Need CF-51 UXGA LCD
Posted: Mon May 25, 2015 4:16 pm
I have CF-51 AB0 and ABB claim to have UXGA.
Units with VRAM third letter is F. I have none of those. Still looking for bare LCD.
I have no units with VRAM. (F)
Units with VRAM third letter is F. I have none of those. Still looking for bare LCD.
I have no units with VRAM. (F)
Re: Need CF-51 UXGA LCD
Posted: Mon May 25, 2015 5:28 pm
FYI one off of a 50 will work as well. 1600 x 1200 so any of the CF-50's or 51 models with ATI graphics will have that screen. I have also seen talk of someone before saying they replaced a CF-50 screen with one from a CF-48 so that may also be a option depending on the resolution of the screen. I am not sure if any of the CF-48's with ATI has a resolution up that high.
Re: Need CF-51 UXGA LCD
Posted: Mon May 25, 2015 8:52 pm
Here is one I really liked for my CF-50 ....Sharp LQ150U1LW22 (N) It is missing the (N) on the end. Not sure what (N) designates. Found here....http://www.ebay.com/itm/151531115833?_t ... EBIDX%3AIT
-Nick
-Nick
Re: Need CF-51 UXGA LCD
Posted: Mon May 25, 2015 11:17 pm
Its for a CF-51mk3,I bought a beautiful one with a line in the screen.I know the connector is different from the pent m models and the core duo models so not sure a CF-50 screen will work,part number in a few.
CF-51PFDDBDM
CF-51PFDDBDM
Re: Need CF-51 UXGA LCD
Posted: Tue May 26, 2015 2:47 am
The LCD connector is different from xga to uxga...safn1949 wrote:Its for a CF-51mk3,I bought a beautiful one with a line in the screen.I know the connector is different from the pent m models and the core duo models so not sure a CF-50 screen will work,part number in a few.
CF-51PFDDBDM
Re: Need CF-51 UXGA LCD
Posted: Tue May 26, 2015 4:33 am
I have a cable for a cf51.....I will dig it out....
Re: Need CF-51 UXGA LCD
Posted: Tue May 26, 2015 3:28 pm
F= 15" UXGA 128mb VRAM.
Are there three cable types? Curious. (edit 3)
Meanwhile I found the missing screen. Bad news it's IBM...BUT....is it compatible? Pictures soon.....watch this post end first edit..
It's this one.
http://www.pchub.com/uph/laptop/517-162 ... SXGA-.html
So SXGA. Sorry.
End edit 2
Are there three cable types? Curious. (edit 3)
Meanwhile I found the missing screen. Bad news it's IBM...BUT....is it compatible? Pictures soon.....watch this post end first edit..
It's this one.
http://www.pchub.com/uph/laptop/517-162 ... SXGA-.html
So SXGA. Sorry.
End edit 2
Re: Need CF-51 UXGA LCD
Posted: Tue May 26, 2015 7:53 pm
Both screens I swapped were UXGA with the same resolution. The 9000 and 9600 ATI card were optional on the CF-50's Those units are the ones with the right screen I was talking about. If it doesn't have a ATI card from the factory it has the XGA screen. The only CF-51's I really messed with were the Mk3 with the X1300 card. So I went from CF-50 to CF-51 Mk3.