Page 2 of 5
Re: Toughbook Part out
Posted: Wed Nov 05, 2014 8:40 pm
by safn1949
ADOR wrote:GETAC V100
1.2 dual core
has web cam
I was running windows 7 on it and I loaned it to a ex-inlaw to use until his other pc got fixed. He broke the charging port or charger, I am not sure. It wouldn't turn back on. Has caddy, x strap, carry strap all covers. Got to find the charger for it, so now no charger. Vista COA on it. Battery was working fine before this happen but I haven't seen it turned in on in over a year. I am pulling the battery and ram, selling the rest.
Make Offer or trade
100_2327 by
safjist_nipnog, on Flickr
100_2328 by
safjist_nipnog, on Flickr
100_2329 by
safjist_nipnog, on Flickr
If no one wants it I think I will just part it out on ebay.
I might have a charger for it if it takes the same one as a Getac B300,HP charger works. Let me know if you need one to see if the laptop works.
Re: Toughbook Part out and other stuff.
Posted: Wed Nov 05, 2014 8:49 pm
by ADOR
What Mk CF-M34? I have a few sticks I think I got three or four 512 sticks from the experiments on the Mk3 to try to get it over 512Mb total.
I have the charger in the shed somewhere for the Getac, I tried it when I got it back from him. It wouldn't turn on. I just haven't had time to figure out why. I got more important projects to get to right now.
Re: Toughbook Part out and other stuff.
Posted: Wed Nov 05, 2014 8:53 pm
by ADOR
Shawn wrote:I'm interested in the bluetooth.......
What do you need?...How about a CF19 lower housing? CF30 lower housing?
I have a few drawers full of small parts..
If I would of known that last time, I would of dropped it in the box with the other parts last time.
I have 3 or 4 19's left that should be up soon, gettting ready to get rid of a lot of stuff. I think most of the ones I have left are 19 Mk1's with dead touch screens.
I am down to 3 CF-30's. Got to fix the screen on one, then get rid of two of them. Keeping one for me. Just redid one with 100 GB SSD.
I can't really think of anything I need right off the top of my head, but may here in a day or so.
Re: Toughbook Part out and other stuff.
Posted: Wed Nov 05, 2014 8:57 pm
by mklym
I am interested in the CF-29/30 rubber kb and the CF-30 handle, as well as the damaged CF-29/30 rubber kb, the one with the damaged key.
Does the handle have the nylon bushings, and what damage to the key, does the key work but has no rubber over it, or??
Re: Toughbook Part out and other stuff.
Posted: Wed Nov 05, 2014 9:16 pm
by Shawn
Sadlmkr wrote:Shawn, what mark 19? Tell me it's a bios locked MK 2 with 20 hours on it.
Ador, I need a little ram for three CF-M34. Do you have?
When I said housing, I meant "housing, palm rest and some doors.." No mainboard.. I have 2 or 3 in nice shape..
I do have a loose mainboard for a CF19 and a CF30 with a password BIOS...
I have a complete CF 19 mk1 without a password. with led backlight in lcd
I can put a CF 19 housing and the mainboard on a slow train to the left coast for you...
Re: Toughbook Part out and other stuff.
Posted: Thu Nov 06, 2014 1:27 am
by WittgensteinSergeant
Cursing in the curch, but I might be intrested in that Getac ADOR.
Re: Toughbook Part out and other stuff.
Posted: Thu Nov 06, 2014 5:46 pm
by ADOR
mklym wrote:I am interested in the CF-29/30 rubber kb and the CF-30 handle, as well as the damaged CF-29/30 rubber kb, the one with the damaged key.
Does the handle have the nylon bushings, and what damage to the key, does the key work but has no rubber over it, or??
I will put those up for you, and hold on a few days incase you see something else you want. Round two is coming up.
On the handle If did have all of the bushings with it. Let me look to make sure they are all there. On the key, It was on a unit I had and I pulled it off and replaced it. Never tested the bad area.
Re: Toughbook Part out and other stuff.
Posted: Thu Nov 06, 2014 5:48 pm
by ADOR
WittgensteinSergeant wrote:Cursing in the church, but I might be interested in that Getac ADOR.
Not a problem, some of us try some of the other fully rugged just to see what they are about. Then we usually come back, lol. It wasn't a bad unit, comparable to a Mk1/2 CF-19. Got 4 desktops for me I am building up so I am just making room on projects I won't be doing for a long time.
Re: Toughbook Part out and other stuff.
Posted: Sat Nov 08, 2014 11:17 am
by mklym
ADOR wrote:mklym wrote:I am interested in the CF-29/30 rubber kb and the CF-30 handle, as well as the damaged CF-29/30 rubber kb, the one with the damaged key.
Does the handle have the nylon bushings, and what damage to the key, does the key work but has no rubber over it, or??
I will put those up for you, and hold on a few days incase you see something else you want. Round two is coming up.
On the handle If did have all of the bushings with it. Let me look to make sure they are all there. On the key, It was on a unit I had and I pulled it off and replaced it. Never tested the bad area.
Okay, thank you. How many 'rounds' are you planning? Like a heavy weight title bout, 12 rounds? LOL.
Thanks for the info on the parts.
Re: Toughbook Part out and other stuff.
Posted: Sat Nov 08, 2014 6:10 pm
by ADOR
Well I have the kids this weekend end right now. I am thinking I am going to part out another CF-30 Mk2 (WWAN/GPS)(still debating) instead of fixing the screen, complete top end for CF-30 Mk2 that had WWAN. Two CF-74 Mk4's, lots of small misc parts, maybe a CF-52 whole or part. It's a big clean out. More back on the week days after I get the fuel lines and radiator hoses run on the 52 ford.