OpenSuSe on the CF-18, can't get TS calibrated?!
OpenSuSe on the CF-18, can't get TS calibrated?!
My TS is apparently un-calibrateable, whenever I do calibrate it with Xinput-Calibrator and save the stuff in a .conf file+reboot, it still won't work properly? It's acting like a touchpad for some reason. (can only move left-right)
Last edited by WittgensteinSergeant on Tue Oct 07, 2014 12:28 pm, edited 1 time in total.
- kode-niner
- Posts: 700
- Joined: Sat Jun 07, 2014 7:39 am
- Location: Canada
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
What is your full CF-18 model number as stated in BIOS?
Calibration should be immediate, with the conf file for saving the settings permanently. Is it at least working right after calibration?
Calibration should be immediate, with the conf file for saving the settings permanently. Is it at least working right after calibration?
Daily drives a CF-31
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
It acts like a touchpad?
CF-18DHB11GG
CF-18DHB11GG
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
Sorry, I thought I sent this......One more time.
What is output from:
Thank you.
Jeff
| is shifted \
What is output from:
Code: Select all
dmesg | grep PS/2
Code: Select all
dmesg | grep input
Jeff
| is shifted \
Fair for you/ Fair for me.
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
I'll do this later tomorrow, school is in the way for now ;cSadlmkr wrote:Sorry, I thought I sent this......One more time.
What is output from:
Code: Select all
dmesg | grep PS/2
Thank you.Code: Select all
dmesg | grep input
Jeff
| is shifted \
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
Code: Select all
toughbook@linux-oy6o:~> dmesg | grep PS/2
[ 1.561080] i8042: PNP: PS/2 Controller [PNP0303:K101,FJC6000:MOU2] at 0x60,0x64 irq 1,12
[ 1.564512] mousedev: PS/2 mouse device common for all mice
[ 2.161186] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio3/input/input1
[ 3.339701] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input2
Code: Select all
toughbook@linux-oy6o:~> dmesg | grep input
[ 1.597115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.161186] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio3/input/input1
[ 3.339701] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input2
[ 3.477407] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3
[ 3.484664] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 3.488492] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 3.497381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 19.851142] input: Panasonic Laptop Support as /devices/virtual/input/input7
[ 20.230696] input: PC Speaker as /devices/platform/pcspkr/input/input8
- kode-niner
- Posts: 700
- Joined: Sat Jun 07, 2014 7:39 am
- Location: Canada
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
I'm not exactly how you would equate a left-right only movement to a touchpad since that would also indicate something wrong with the touchpad itself.
Anyway, do you already have an /etc/X11/xorg.conf file on your system?
Anyway, do you already have an /etc/X11/xorg.conf file on your system?
Daily drives a CF-31
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
If you mean a folder like that, yiss I do.kode-niner wrote:I'm not exactly how you would equate a left-right only movement to a touchpad since that would also indicate something wrong with the touchpad itself.
Anyway, do you already have an /etc/X11/xorg.conf file on your system?
Touchpad is working fine though?
- kode-niner
- Posts: 700
- Joined: Sat Jun 07, 2014 7:39 am
- Location: Canada
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
I mean, quite precisely, the /etc/X11/xorg.conf file. Not /etc/X11/xorg.conf.d directory. If you have an xorg.conf file it may have conflicting sections with files you may have in the xorg.conf.d directory. If you do not have a xorg.conf file, this simplifies our troubleshooting.
If you followed the instructions in Jeff's really cool thread here:
viewtopic.php?f=39&t=1960
...then you have created a file called:
Jeff, feel free to chime in, here. I've never owned a CF-18.
cheers!
Can you please explain to me exactly how only moving left-right equates to acting like a touchpad? I fear there may be some sort of language barrier here.WittgensteinSergeant wrote:It's acting like a touchpad for some reason. (can only move left-right)
If you followed the instructions in Jeff's really cool thread here:
viewtopic.php?f=39&t=1960
...then you have created a file called:
Can you show us the contents of this file? We'll do our best to help you./etc/X11/xorg.conf.d/99-calibration.conf
Jeff, feel free to chime in, here. I've never owned a CF-18.
cheers!
Daily drives a CF-31
Re: OpenSuSe on the CF-18, can't get TS calibrated?!
It only moves side to side, not up or down. And when I calibrate the screen, it does the same.kode-niner wrote:I mean, quite precisely, the /etc/X11/xorg.conf file. Not /etc/X11/xorg.conf.d directory. If you have an xorg.conf file it may have conflicting sections with files you may have in the xorg.conf.d directory. If you do not have a xorg.conf file, this simplifies our troubleshooting.
Can you please explain to me exactly how only moving left-right equates to acting like a touchpad? I fear there may be some sort of language barrier here.WittgensteinSergeant wrote:It's acting like a touchpad for some reason. (can only move left-right)
If you followed the instructions in Jeff's really cool thread here:
viewtopic.php?f=39&t=1960
...then you have created a file called:Can you show us the contents of this file? We'll do our best to help you./etc/X11/xorg.conf.d/99-calibration.conf
Jeff, feel free to chime in, here. I've never owned a CF-18.
cheers!
Code: Select all
Section "InputClass"
Identifier "calibration"
MatchProduct "LBPS/2 Fujitsu LifeBook TouchScreen"
Option "Calibration" "73 891 1041 1041"
Option "SwapAxes" "0"
EndSection