You need:
Fairly recent Linux version.
A text editor.
So here we go. ##Anything after the # is just notes. The way I did it before I had a text editor and two terminals open at the same time.
Code: Select all
sudo mkdir /etc/X11/xorg.conf.d/ #creates a directory...only done once per machine
Code: Select all
sudo apt-get install xinput-calibrator
Code: Select all
xinput_calibrator #minus sign became an underscore
Section "InputClass"
Identifier "calibration"
MatchProduct "Fujitsu Component USB Touch Panel"
Option "Calibration" "303 4000 258 3917"
Option "SwapAxes" "0"
EndSection
Code: Select all
sudo nano /etc/X11/xorg.conf.d/99-calibration.conf
[[Enter]
notes: Calibration,calibrator and calibrate are all seen here.
Watch the - sign and the _ .........they move. X11 is a capital letter.
Let me know.
Thanks,
J'd