non touch to touch
non touch to touch
So here's the deal,I have a high mileage mk1 touch that is a hanger queen,it has already lost some major parts. I have a 2200 hour mk3 that is very pretty but it is a non touch model,I already poked around and see it isn't a straight up switch the top deal .
So enlighten me as to how it is done.
So enlighten me as to how it is done.
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.
Re: non touch to touch
I would think you could just swap out the entire top lid. Case, LCD, panel, and all.
-Claes
There can only be one!
There can only be one!
Re: non touch to touch
Nope,connectors are different on the board. I took both apart cuz I was bored and I'm at a standstill.
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.
- Springfield
- Posts: 1512
- Joined: Wed Oct 07, 2009 9:19 pm
- Location: FL
Re: non touch to touch
Believe the Mk3 has LED backlight, earlier Mks are LCD. So they are not interchangeable.safn1949 wrote:So enlighten me as to how it is done.
Might be able to swap just the bezel with touch panel from Mk1 to Mk3 but I've not personally tried it or closely examined both. Maybe Jeff knows . . .
ToughBooks: CF-74 73 53 52 51 31 30 29 28 27 25 19 18 08 07 C1 C2 F9 H1 M32 M33 M34 R2 S10 T8 T5 T4 T2 U1 W2 Y2 VDW07 PDRC ...
GoBooks: VR-2, XR-1, IX-260+, IX-350
GoBooks: VR-2, XR-1, IX-260+, IX-350
Re: non touch to touch
Makes sense as the connected was different,I also just happen to have one of the US Navy mk3's with touch. If it is a straight up switch I will go get it from a guy and do so,been trying to sell it but why not make 1 very sellable mk3.Springfield wrote:Believe the Mk3 has LED backlight, earlier Mks are LCD. So they are not interchangeable.safn1949 wrote:So enlighten me as to how it is done.
Might be able to swap just the bezel with touch panel from Mk1 to Mk3 but I've not personally tried it or closely examined both. Maybe Jeff knows . . .
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.
Re: non touch to touch
Nope! The MK3 still uses CCFL tube. The only difference is the connector on the mobo and the glossy lcd together with TS panel. You can still use the whole LCD assembly of the MK1 but you need to change the harness. The top half LCD assembly of MK2 is perfect but as I said you loose the clarity effect of the LCD.
Be informed also that the LCD of the MK3 must always be with TS panel of it or its mate otherwise there is a rainbow effect on viewing.
teo
Be informed also that the LCD of the MK3 must always be with TS panel of it or its mate otherwise there is a rainbow effect on viewing.
teo
Re: non touch to touch
So if I understand correctly I should use the entire mk1 LCD and everything,just change the harness?
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.
Re: non touch to touch
Ok,I got everything switched around.I'm having a time with this thing,it refuses to calibrate.It wont even try to ,either with the tablet setting in control panel or the fujitsu calibration. Touch works until you try to calibrate it then it freezes up and you have to restart.
I'm running windows 7 pro on this,so any ideas?
I'm running windows 7 pro on this,so any ideas?
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.
Re: non touch to touch
Set bios to defaults
Ensure touch is either tablet or auto with tablet enabled [F10]
Super Key (between function and alt windows looking thing)
Type cali
Select tablet pc settings
click setup
touch the screen
tap reset (removes old settings)
tap calibrate
etc
Ensure touch is either tablet or auto with tablet enabled [F10]
Super Key (between function and alt windows looking thing)
Type cali
Select tablet pc settings
click setup
touch the screen
tap reset (removes old settings)
tap calibrate
etc
Fair for you/ Fair for me.
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
Re: non touch to touch
Thanks,we will give it a whirl.
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.