Teo, I installed both on (Compatible) not AHCI. The recovery media would not boot for the SSD on AHCI. I got it to boot in the other machine now in safe mode, I am downloading the driver for the ATI video card. I'm wondering if its BSOD because the host install machine does not have the ATI card/driver and the transplant machine does?teo wrote:Connor922 wrote:Ok so heres an update on this, I successfully ran the recovery disk on another MK3 machine. After the recovery software ran and shut down, I placed the SSD and caddy back in the other machine. Boom BSOD immeadiately or windows displays an error. Is there a different recovery disk for the 2.53 MK3 versus the 2.4?? I also checked RAM is good and caddy and cable connector is good.
Connor ...Check the setting of the drive from the machine If it is IDE or AHCI. If you installed an os from the machine with a setting of IDE and then place it into another machine with setting of AHCI. It will give you an BSOD. It must be at the same setting.
teo
CF-52 MK3 SSD Issues
Re: CF-52 MK3 SSD Issues
Re: CF-52 MK3 SSD Issues
Connor922 wrote:........... I'm wondering if its BSOD because the host install machine does not have the ATI card/driver and the transplant machine does?
That will do it........
Life will beat you into submission.