~Toughbooktalk~

Posted: **Wed Jul 27, 2016 2:53 pm**

kode-niner wrote:Good job! One thing though, it is not necessary to run a make. The install.sh script does that already. We only ran that command separately here for troubleshooting.

oops.

Added an annotation to the video and removed that part of the blog post. Thanks for the input.

Posted: **Mon Apr 24, 2017 12:56 pm**

Well I guess you had to see this one coming. CF-19 MK4 Dual Touch won't work with the rotate script in this post. Here is a replacement that'll swap coords for both touch and pen. Pretty easy to see what I did here: doubled the xinput lines and put in the proper device names.

Code: Select all

#!/bin/sh

# Find the line in "xrandr -q --verbose" output that contains current screen orientation and "strip" out current orientation.

rotation="$(xrandr -q --verbose | grep 'connected' | egrep -o  '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"

# Using current screen orientation proceed to rotate screen and input tools.

case "$rotation" in
    normal)
    # rotate to the left
    xrandr -o left
    xinput set-prop 'Wacom ISDv4 93 Finger touch' 'Coordinate Transformation Matrix' 0 -1 1 1 0 0 0 0 1
    xinput set-prop 'Wacom ISDv4 93 Pen stylus' 'Coordinate Transformation Matrix' 0 -1 1 1 0 0 0 0 1
    ;;
    left)
    # rotate to inverted
    xrandr -o inverted
    xinput set-prop 'Wacom ISDv4 93 Pen stylus' 'Coordinate Transformation Matrix' -1 0 1 0 -1 1 0 0 1
    xinput set-prop 'Wacom ISDv4 93 Finger touch' 'Coordinate Transformation Matrix' -1 0 1 0 -1 1 0 0 1
    ;;
    inverted)
    # rotate to the right
    xrandr -o right
    xinput set-prop 'Wacom ISDv4 93 Pen stylus' 'Coordinate Transformation Matrix' 0 1 0 -1 0 1 0 0 1
    xinput set-prop 'Wacom ISDv4 93 Finger touch' 'Coordinate Transformation Matrix' 0 1 0 -1 0 1 0 0 1
    ;;
    right)
    # rotate to normal
    xrandr -o normal
    xinput set-prop 'Wacom ISDv4 93 Pen stylus' 'Coordinate Transformation Matrix' 1 0 0 0 1 0 0 0 1
    xinput set-prop 'Wacom ISDv4 93 Finger touch' 'Coordinate Transformation Matrix' 1 0 0 0 1 0 0 0 1
    ;;
esac

Posted: **Fri Apr 28, 2017 6:54 pm**

Looking at the above, I should probably have added the coordinates for the eraser too. Didn't think of it because my stylus has a broken button.

Posted: **Sun Jul 02, 2017 3:34 pm**

Ran into a few minor snags after upgrading to Debian stretch with kernel 4 and panasonic-hbtn. I got it sorted, so if anybody is still using this and has issues, don't be shy!
It might have involved copying the ko file in /var/lib/modules/4.xxxxxx and running depmod -a to rebuild the module dependencies.

Posted: **Fri Jul 07, 2017 7:10 pm**

Screen rotation is fine.

Getting an error each time as /usr/local/bin/rotate points at Fujitsu TS.

Code: Select all

#!/bin/sh

# Find the line in "xrandr -q --verbose" output that contains current screen orientation and "strip" out current orientation.

rotation="$(xrandr -q --verbose | grep 'connected' | egrep -o  '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"

# Using current screen orientation proceed to rotate screen and input tools.

case "$rotation" in
    normal)
    # rotate to the left
    xrandr -o left
    xinput set-prop 'Fujitsu Component USB Touch Panel' 'Coordinate Transformation Matrix' 0 -1 1 1 0 0 0 0 1
    ;;
    left)
    # rotate to inverted
    xrandr -o inverted
    xinput set-prop 'Fujitsu Component USB Touch Panel' 'Coordinate Transformation Matrix' -1 0 1 0 -1 1 0 0 1
    ;;
    inverted)
    # rotate to the right
    xrandr -o right
    xinput set-prop 'Fujitsu Component USB Touch Panel' 'Coordinate Transformation Matrix' 0 1 0 -1 0 1 0 0 1
    ;;
    right)
    # rotate to normal
    xrandr -o normal
    xinput set-prop 'Fujitsu Component USB Touch Panel' 'Coordinate Transformation Matrix' 1 0 0 0 1 0 0 0 1
    ;;
esac

FYI to show someone is working with this. I see what I have to do.

Posted: **Fri Jul 07, 2017 7:28 pm**

xinput list --name only
?

Posted: **Fri Jul 07, 2017 7:50 pm**

I knew you would ask.

CF-19MK6

Code: Select all

xinput -list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Wacom ISDv4 93 Pen                      	id=9	[slave  pointer  (2)]
⎜   ↳ Wacom ISDv4 93 Finger                   	id=10	[slave  pointer  (2)]
⎜   ↳ ImPS/2 Generic Wheel Mouse              	id=12	[slave  pointer  (2)]
⎣

I deleted usr/local/bin/rotate and pasted your post above to new file of the same name.

Posted: **Fri Jul 07, 2017 7:59 pm**

O.K. I got to here by page 4 ......need to go find out why the touch input is bassackwards.

Oh yeah this is MX-16.

Posted: **Fri Jul 07, 2017 10:06 pm**

I posted in the calibration thread on how to do this. Need to use xsetwacom.

Here: http://www.toughbooktalk.com/viewtopic. ... =50#p27708

Posted: **Fri Jul 07, 2017 10:26 pm**

O.K. great.

I went back through this and used your second file. (panasonic-hbtn) It seemed to be more clear (to me) the second time around.....it did ask if it should overwrite.
Rotate and button worked until I rebooted.

Thanks....hey there are no complaints here....this is progress.

~Toughbooktalk~

A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!

Re: A quest, get the CF-19 front keys working!