~Toughbooktalk~

xrandr query says you were at 1024x768x60hz already. Should be interesting to see if specifying it in xorg actually does anything.

This was after the 800x600 test.
Since then the mouse crashed, X crashed and a few other things.

The xrandr query is not what it looked like before tonight. Here's something for your amusement. oh wait....I'll stop it flickering.....closes lid, waits 6 seconds....that's better. So the big numbers towards the bottom are after suspend.....I think you know that. The LVDS1 line I have only seen a couple times....so adding the /etc/X11///etc affected something.

X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 25.108] X Protocol Version 11, Revision 0
[ 25.108] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 25.108] Current Operating System: Linux jeff-CF-30KAPAXAM 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686
[ 25.108] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=caff3f8d-7c68-4b05-b548-515a49a62e1b ro quiet splash vt.handoff=7
[ 25.108] Build Date: 16 April 2014 01:40:08PM
[ 25.108] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 25.108] Current version of pixman: 0.30.2
[ 25.108] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.108] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.108] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 7 21:29:09 2014
[ 25.144] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.144] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.177] (==) No Layout section. Using the first Screen section.
[ 25.177] (**) |-->Screen "Screen0" (0)
[ 25.177] (**) | |-->Monitor "LVDS1"
[ 25.177] (==) Automatically adding devices
[ 25.177] (==) Automatically enabling devices
[ 25.177] (==) Automatically adding GPU devices
[ 25.177] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.177] Entry deleted from font path.
[ 25.177] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.177] Entry deleted from font path.
[ 25.177] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.177] Entry deleted from font path.
[ 25.177] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.177] Entry deleted from font path.
[ 25.177] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.177] Entry deleted from font path.
[ 25.177] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 25.177] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.177] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.177] (II) Loader magic: 0xb77a36c0
[ 25.177] (II) Module ABI versions:
[ 25.177] X.Org ANSI C Emulation: 0.4
[ 25.177] X.Org Video Driver: 15.0
[ 25.177] X.Org XInput driver : 20.0
[ 25.177] X.Org Server Extension : 8.0
[ 25.178] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.180] (--) PCI:*(0:0:2:0) 808610f7:8338 rev 7, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x0000e1c0/8
[ 25.180] (--) PCI: (0:0:2:1) 808610f7:8338 rev 7, Mem @ 0xe0400000/1048576
[ 25.180] Initializing built-in extension Generic Event Extension
[ 25.180] Initializing built-in extension SHAPE
[ 25.180] Initializing built-in extension MIT-SHM
[ 25.180] Initializing built-in extension XInputExtension
[ 25.180] Initializing built-in extension XTEST
[ 25.180] Initializing built-in extension BIG-REQUESTS
[ 25.180] Initializing built-in extension SYNC
[ 25.180] Initializing built-in extension XKEYBOARD
[ 25.180] Initializing built-in extension XC-MISC
[ 25.180] Initializing built-in extension SECURITY
[ 25.180] Initializing built-in extension XINERAMA
[ 25.180] Initializing built-in extension XFIXES
[ 25.180] Initializing built-in extension RENDER
[ 25.180] Initializing built-in extension RANDR
[ 25.180] Initializing built-in extension COMPOSITE
[ 25.180] Initializing built-in extension DAMAGE
[ 25.180] Initializing built-in extension MIT-SCREEN-SAVER
[ 25.180] Initializing built-in extension DOUBLE-BUFFER
[ 25.180] Initializing built-in extension RECORD
[ 25.180] Initializing built-in extension DPMS
[ 25.180] Initializing built-in extension Present
[ 25.180] Initializing built-in extension DRI3
[ 25.180] Initializing built-in extension X-Resource
[ 25.180] Initializing built-in extension XVideo
[ 25.180] Initializing built-in extension XVideo-MotionCompensation
[ 25.180] Initializing built-in extension SELinux
[ 25.180] Initializing built-in extension XFree86-VidModeExtension
[ 25.180] Initializing built-in extension XFree86-DGA
[ 25.180] Initializing built-in extension XFree86-DRI
[ 25.180] Initializing built-in extension DRI2
[ 25.180] (II) LoadModule: "glx"
[ 25.228] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.317] (II) Module glx: vendor="X.Org Foundation"
[ 25.317] compiled for 1.15.1, module version = 1.0.0
[ 25.317] ABI class: X.Org Server Extension, version 8.0
[ 25.317] (==) AIGLX enabled
[ 25.317] Loading extension GLX
[ 25.317] (==) Matched intel as autoconfigured driver 0
[ 25.317] (==) Matched intel as autoconfigured driver 1
[ 25.317] (==) Matched modesetting as autoconfigured driver 2
[ 25.317] (==) Matched fbdev as autoconfigured driver 3
[ 25.317] (==) Matched vesa as autoconfigured driver 4
[ 25.317] (==) Assigned the driver to the xf86ConfigLayout
[ 25.317] (II) LoadModule: "intel"
[ 25.318] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.330] (II) Module intel: vendor="X.Org Foundation"
[ 25.330] compiled for 1.15.0, module version = 2.99.910
[ 25.330] Module class: X.Org Video Driver
[ 25.330] ABI class: X.Org Video Driver, version 15.0
[ 25.330] (II) LoadModule: "modesetting"
[ 25.331] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 25.331] (II) Module modesetting: vendor="X.Org Foundation"
[ 25.331] compiled for 1.15.0, module version = 0.8.1
[ 25.331] Module class: X.Org Video Driver
[ 25.331] ABI class: X.Org Video Driver, version 15.0
[ 25.331] (II) LoadModule: "fbdev"
[ 25.331] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.331] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.331] compiled for 1.15.0, module version = 0.4.4
[ 25.331] Module class: X.Org Video Driver
[ 25.331] ABI class: X.Org Video Driver, version 15.0
[ 25.331] (II) LoadModule: "vesa"
[ 25.332] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.332] (II) Module vesa: vendor="X.Org Foundation"
[ 25.332] compiled for 1.15.0, module version = 2.3.3
[ 25.332] Module class: X.Org Video Driver
[ 25.332] ABI class: X.Org Video Driver, version 15.0
[ 25.332] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 25.332] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 25.332] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 25.332] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 25.332] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.332] (II) FBDEV: driver for framebuffer: fbdev
[ 25.332] (II) VESA: driver for VESA chipsets: vesa
[ 25.332] (++) using VT number 8

[ 25.337] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>)
[ 25.337] (WW) Falling back to old probe method for modesetting
[ 25.337] (WW) Falling back to old probe method for fbdev
[ 25.337] (II) Loading sub module "fbdevhw"
[ 25.337] (II) LoadModule: "fbdevhw"
[ 25.337] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.338] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.338] compiled for 1.15.1, module version = 0.0.2
[ 25.338] ABI class: X.Org Video Driver, version 15.0
[ 25.338] (WW) Falling back to old probe method for vesa
[ 25.338] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 25.338] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1
[ 25.338] (II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 25.338] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.338] (==) intel(0): RGB weight 888
[ 25.338] (==) intel(0): Default visual is TrueColor
[ 25.339] (**) intel(0): Framebuffer tiled
[ 25.339] (**) intel(0): Pixmaps tiled
[ 25.339] (**) intel(0): "Tear free" disabled
[ 25.339] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 25.339] (II) intel(0): Output LVDS1 using monitor section LVDS1
[ 25.339] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 25.339] (II) intel(0): Output VGA1 has no monitor section
[ 25.339] (II) intel(0): Output DP1 has no monitor section
[ 25.339] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 25.339] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 0
[ 25.339] (==) intel(0): DPI set to (96, 96)
[ 25.339] (II) Loading sub module "dri2"
[ 25.339] (II) LoadModule: "dri2"
[ 25.339] (II) Module "dri2" already built-in
[ 25.340] (II) UnloadModule: "modesetting"
[ 25.340] (II) Unloading modesetting
[ 25.340] (II) UnloadModule: "fbdev"
[ 25.340] (II) Unloading fbdev
[ 25.340] (II) UnloadSubModule: "fbdevhw"
[ 25.340] (II) Unloading fbdevhw
[ 25.340] (II) UnloadModule: "vesa"
[ 25.340] (II) Unloading vesa
[ 25.340] (==) Depth 24 pixmap format is 32 bpp
[ 25.341] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[ 25.341] (==) intel(0): Backing store enabled
[ 25.341] (==) intel(0): Silken mouse enabled
[ 25.341] (II) intel(0): HW Cursor enabled
[ 25.341] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.341] (==) intel(0): DPMS enabled
[ 25.341] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 25.341] (II) intel(0): [DRI2] Setup complete
[ 25.341] (II) intel(0): [DRI2] DRI driver: i965
[ 25.341] (II) intel(0): [DRI2] VDPAU driver: i965
[ 25.341] (II) intel(0): direct rendering: DRI2 Enabled
[ 25.341] (==) intel(0): hotplug detection: "enabled"
[ 25.341] (--) RandR disabled
[ 25.356] (II) SELinux: Disabled on system
[ 25.364] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.364] (II) AIGLX: enabled GLX_ARB_create_context
[ 25.364] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 25.364] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 25.364] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.364] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.364] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 25.364] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 25.364] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.364] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 25.364] (II) AIGLX: Loaded and initialized i965
[ 25.364] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.369] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.392] (II) intel(0): Setting screen physical size to 270 x 203
[ 25.414] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 25.418] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 25.418] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.418] (II) LoadModule: "evdev"
[ 25.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.430] (II) Module evdev: vendor="X.Org Foundation"
[ 25.430] compiled for 1.15.0, module version = 2.8.2
[ 25.430] Module class: X.Org XInput Driver
[ 25.430] ABI class: X.Org XInput driver, version 20.0
[ 25.430] (II) Using input driver 'evdev' for 'Power Button'
[ 25.430] (**) Power Button: always reports core events
[ 25.430] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 25.430] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.430] (--) evdev: Power Button: Found keys
[ 25.430] (II) evdev: Power Button: Configuring as keyboard
[ 25.430] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 25.430] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.430] (**) Option "xkb_rules" "evdev"
[ 25.430] (**) Option "xkb_model" "pc105"
[ 25.430] (**) Option "xkb_layout" "us"
[ 25.431] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 25.431] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.431] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.431] (**) Video Bus: always reports core events
[ 25.431] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 25.431] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 25.431] (--) evdev: Video Bus: Found keys
[ 25.431] (II) evdev: Video Bus: Configuring as keyboard
[ 25.431] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event5"
[ 25.431] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.431] (**) Option "xkb_rules" "evdev"
[ 25.431] (**) Option "xkb_model" "pc105"
[ 25.431] (**) Option "xkb_layout" "us"
[ 25.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.432] (II) Using input driver 'evdev' for 'Power Button'
[ 25.432] (**) Power Button: always reports core events
[ 25.432] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 25.432] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.432] (--) evdev: Power Button: Found keys
[ 25.432] (II) evdev: Power Button: Configuring as keyboard
[ 25.432] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 25.432] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[ 25.432] (**) Option "xkb_rules" "evdev"
[ 25.432] (**) Option "xkb_model" "pc105"
[ 25.432] (**) Option "xkb_layout" "us"
[ 25.433] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 25.433] (II) No input driver specified, ignoring this device.
[ 25.433] (II) This device may have been added with another device file.
[ 25.433] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 25.433] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 25.434] (II) config/udev: Adding input device Fujitsu Component USB Touch Panel (/dev/input/event4)
[ 25.434] (**) Fujitsu Component USB Touch Panel: Applying InputClass "evdev tablet catchall"
[ 25.434] (**) Fujitsu Component USB Touch Panel: Applying InputClass "calibration"
[ 25.434] (II) Using input driver 'evdev' for 'Fujitsu Component USB Touch Panel'
[ 25.434] (**) Fujitsu Component USB Touch Panel: always reports core events
[ 25.434] (**) evdev: Fujitsu Component USB Touch Panel: Device: "/dev/input/event4"
[ 25.434] (--) evdev: Fujitsu Component USB Touch Panel: Vendor 0x430 Product 0x530
[ 25.434] (--) evdev: Fujitsu Component USB Touch Panel: Found 1 mouse buttons
[ 25.434] (--) evdev: Fujitsu Component USB Touch Panel: Found absolute axes
[ 25.434] (--) evdev: Fujitsu Component USB Touch Panel: Found x and y absolute axes
[ 25.434] (--) evdev: Fujitsu Component USB Touch Panel: Found absolute tablet.
[ 25.434] (**) Option "SwapAxes" "0"
[ 25.434] (II) evdev: Fujitsu Component USB Touch Panel: Configuring as tablet
[ 25.434] (**) evdev: Fujitsu Component USB Touch Panel: YAxisMapping: buttons 4 and 5
[ 25.434] (**) evdev: Fujitsu Component USB Touch Panel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input10/event4"
[ 25.434] (II) XINPUT: Adding extended input device "Fujitsu Component USB Touch Panel" (type: TABLET, id 9)
[ 25.434] (II) evdev: Fujitsu Component USB Touch Panel: initialized for absolute axes.
[ 25.434] (**) Fujitsu Component USB Touch Panel: (accel) keeping acceleration scheme 1
[ 25.434] (**) Fujitsu Component USB Touch Panel: (accel) acceleration profile 0
[ 25.434] (**) Fujitsu Component USB Touch Panel: (accel) acceleration factor: 2.000
[ 25.434] (**) Fujitsu Component USB Touch Panel: (accel) acceleration threshold: 4
[ 25.435] (II) config/udev: Adding input device Fujitsu Component USB Touch Panel (/dev/input/mouse0)
[ 25.435] (**) Fujitsu Component USB Touch Panel: Applying InputClass "calibration"
[ 25.435] (II) No input driver specified, ignoring this device.
[ 25.435] (II) This device may have been added with another device file.
[ 25.435] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 25.435] (II) No input driver specified, ignoring this device.
[ 25.435] (II) This device may have been added with another device file.
[ 25.435] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 25.435] (II) No input driver specified, ignoring this device.
[ 25.435] (II) This device may have been added with another device file.
[ 25.436] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 25.436] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.436] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.436] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.436] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 25.436] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 25.436] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 25.436] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 25.436] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 25.436] (**) Option "xkb_rules" "evdev"
[ 25.436] (**) Option "xkb_model" "pc105"
[ 25.436] (**) Option "xkb_layout" "us"
[ 25.437] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[ 25.437] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 25.437] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 25.437] (**) PS/2 Generic Mouse: always reports core events
[ 25.437] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6"
[ 25.437] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 25.437] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 25.437] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 25.437] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 25.437] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 25.437] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 25.437] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.437] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event6"
[ 25.437] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[ 25.437] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 25.437] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 25.437] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 25.437] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 25.437] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 25.437] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 25.438] (II) No input driver specified, ignoring this device.
[ 25.438] (II) This device may have been added with another device file.
[ 25.440] (II) config/udev: Adding input device Panasonic Laptop Support (/dev/input/event7)
[ 25.440] (**) Panasonic Laptop Support: Applying InputClass "evdev keyboard catchall"
[ 25.440] (II) Using input driver 'evdev' for 'Panasonic Laptop Support'
[ 25.440] (**) Panasonic Laptop Support: always reports core events
[ 25.440] (**) evdev: Panasonic Laptop Support: Device: "/dev/input/event7"
[ 25.440] (--) evdev: Panasonic Laptop Support: Vendor 0x1 Product 0x1
[ 25.440] (--) evdev: Panasonic Laptop Support: Found keys
[ 25.440] (II) evdev: Panasonic Laptop Support: Configuring as keyboard
[ 25.440] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event7"
[ 25.440] (II) XINPUT: Adding extended input device "Panasonic Laptop Support" (type: KEYBOARD, id 12)
[ 25.440] (**) Option "xkb_rules" "evdev"
[ 25.440] (**) Option "xkb_model" "pc105"
[ 25.440] (**) Option "xkb_layout" "us"
[ 50.906] (II) XKB: reuse xkmfile /var/lib/xkb/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 51.254] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.378] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.384] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.390] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.396] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.402] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.409] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 69.415] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 456.285] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 463.944] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 463.965] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 464.061] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm
[ 465.332] (II) XKB: reuse xkmfile /var/lib/xkb/server-1908D3BB0224FA577B58A32F49D8B4107F7BAFFD.xkm

Jeff, downloading torrents now for Slitaz 4.0, Slitax 5.0 RC2, 7.6.0 Xfce, Rescue, Gnome, Standard, etc. All onto a CD.
Testing results for a CF-30MK3 to follow. Call me when convenient. Best regards, Cleve

I think the xorg logs are of little use. Jeff, try this.
Close the lid then open it back up like you usually do to clear the flicker. Then type these two commands: Maybe we can see what changes occur once you close the lid. You are redirecting the verbose output of xrandr into two files in order to compare them. If you get nothing after doing the diff (which parses query1 and query2 for differences), we'll have to look elsewhere.

Clean up after yourself:

This makes sense.

Thanks,

Jeff

Cool. Let me know how it goes and post the output of the diff, if any.

diff is below.


4c4
< Timestamp: 43840
---
> Timestamp: 227986
35c35
< Timestamp: 43840
---
> Timestamp: 227986
45c45
< Timestamp: 43840
---
> Timestamp: 227986
59c59
< Timestamp: 43840
---
> Timestamp: 227986

That proves that mode settings do not change after the lid goes down. Have you looked into the i915 power save bug? I thought I told you to try this command around here at one time or another: Edit: might need to throw in a sudo if you aren't su.

powersave now says 0 but no change in flicker.

I don't care about the flicker I just want to know why.

Heartfelt thanks for chiming in with the info.

Don't care about Flicka...Horse's have feelings too..