Ledco Docking Station

Post all general Toughbook related things here.
Message
Author
Rich
Posts: 157
Joined: Sat Oct 03, 2015 5:50 pm
Location: Evergreen State

Ledco Docking Station

#1 Post by Rich »

I just got a Ledco vehicle docking station ( on-board power supply, just supply vehicle power ) I want to use it in our shop to charge our CF-30, so a mechanic can just grab and go then put it back, no horribly complicated power cable for them to reconnect. (sorry for the sarcasm, but it has been an issue.) Any one have any suggestions for a 120 volt power supply?
We get some rules to follow.
That and this, these and those
.

CF-20 Mk1, CF-31 Mk5 i7, CF-31 Mk6 i7, FZ-G1 Mk2, CF-54 Mk2, CF-29 Mk5, CF-74J,
Star Labs Star Lite Mk3, Star Labs Labtop Mk3, Raspberry Pi 4b 8gb, Raspberry Pi-400, Raspberry Zero W(running piaware), Raspberry Pi 2

User avatar
Rob
Toughbooktalk Founder
Posts: 3575
Joined: Mon Mar 16, 2009 8:23 pm
Contact:

Re: Ledco Docking Station

#2 Post by Rob »

I need the full model number of the dock.... However it should work with the same exact charger you use to charge your Toughbook (The charger with the 90 degree tip)

Thanks!
~Rob - Vice President - Rugged Depot~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~

http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater


~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~

Rich
Posts: 157
Joined: Sat Oct 03, 2015 5:50 pm
Location: Evergreen State

Re: Ledco Docking Station

#3 Post by Rich »

I cant find a number on it, but it has a power cable similar to this one. So I am assuming (dangerous) that this cable would have been connected directly to the cars electrical system. So do I just get a laptop power supply and cut off the end and splice it to this cable?

Both images are from google, easier to get.
Attachments
Ledco dock.jpg
Ledco dock.jpg (90.05 KiB) Viewed 8910 times
power cable.jpg
power cable.jpg (118.72 KiB) Viewed 8910 times
We get some rules to follow.
That and this, these and those
.

CF-20 Mk1, CF-31 Mk5 i7, CF-31 Mk6 i7, FZ-G1 Mk2, CF-54 Mk2, CF-29 Mk5, CF-74J,
Star Labs Star Lite Mk3, Star Labs Labtop Mk3, Raspberry Pi 4b 8gb, Raspberry Pi-400, Raspberry Zero W(running piaware), Raspberry Pi 2

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: Ledco Docking Station

#4 Post by Shawn »

I had to read the post several times to understand.

You are going to use the dock mounted in the shop.

Please post a photo of the bottom of YOUR dock. Not a Google grab. I need it to have specific information.

Look at the picture I posted. It is the underside of the dock. See the black box marked "LIND"?
That is the actual power supply. It takes 12vdc from the vehicle and converts it to 15.6vdc for the dock/Toughbook to use.

All you need to do is remove that power supply and connect a standard Toughbook power supply in place of it. 120vac to 15.6vdc.
Both power supplies probably have the same output connector. In most cases no wire cutting will be needed.
Attachments
edu1192-ledco-havis-docking-station-panasonic-toughbook-cf-30-cf-31-pkg-ds-pan-112-1-2.jpeg
edu1192-ledco-havis-docking-station-panasonic-toughbook-cf-30-cf-31-pkg-ds-pan-112-1-2.jpeg (222.87 KiB) Viewed 8901 times
Life will beat you into submission.

Rich
Posts: 157
Joined: Sat Oct 03, 2015 5:50 pm
Location: Evergreen State

Re: Ledco Docking Station

#5 Post by Rich »

I hope this picture helps.
Attachments
image.jpeg
image.jpeg (2.54 MiB) Viewed 8899 times
We get some rules to follow.
That and this, these and those
.

CF-20 Mk1, CF-31 Mk5 i7, CF-31 Mk6 i7, FZ-G1 Mk2, CF-54 Mk2, CF-29 Mk5, CF-74J,
Star Labs Star Lite Mk3, Star Labs Labtop Mk3, Raspberry Pi 4b 8gb, Raspberry Pi-400, Raspberry Zero W(running piaware), Raspberry Pi 2

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: Ledco Docking Station

#6 Post by Shawn »

That's going to take some research as the power supply is internal.

I can see what I can find online.
You could carefully open the dock and post a photo of the inside of it.
Life will beat you into submission.

Rich
Posts: 157
Joined: Sat Oct 03, 2015 5:50 pm
Location: Evergreen State

Re: Ledco Docking Station

#7 Post by Rich »

I will do that next chance I can sneak it when boss leaves.
We get some rules to follow.
That and this, these and those
.

CF-20 Mk1, CF-31 Mk5 i7, CF-31 Mk6 i7, FZ-G1 Mk2, CF-54 Mk2, CF-29 Mk5, CF-74J,
Star Labs Star Lite Mk3, Star Labs Labtop Mk3, Raspberry Pi 4b 8gb, Raspberry Pi-400, Raspberry Zero W(running piaware), Raspberry Pi 2

Rich
Posts: 157
Joined: Sat Oct 03, 2015 5:50 pm
Location: Evergreen State

Re: Ledco Docking Station

#8 Post by Rich »

Here's picture of inside. Sorry they are so big, from my phone.
Attachments
image.jpeg
image.jpeg (2.15 MiB) Viewed 8891 times
We get some rules to follow.
That and this, these and those
.

CF-20 Mk1, CF-31 Mk5 i7, CF-31 Mk6 i7, FZ-G1 Mk2, CF-54 Mk2, CF-29 Mk5, CF-74J,
Star Labs Star Lite Mk3, Star Labs Labtop Mk3, Raspberry Pi 4b 8gb, Raspberry Pi-400, Raspberry Zero W(running piaware), Raspberry Pi 2

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: Ledco Docking Station

#9 Post by Shawn »

When the boss leaves.... Funny, because I have been there.
With that particular dock, your solution may require a 12v power supply.
My best guess is a decent 12v power supply with a minimum of 10 amp regulated output.

This one looks interesting.
http://www.ebay.com/itm/Todd-Engineerin ... 01&vxp=mtr
Life will beat you into submission.

User avatar
Rob
Toughbooktalk Founder
Posts: 3575
Joined: Mon Mar 16, 2009 8:23 pm
Contact:

Re: Ledco Docking Station

#10 Post by Rob »

I'm checking with my inside gal Stacey at Havis with this!

Hang tight!
~Rob - Vice President - Rugged Depot~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~

http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater


~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~

Post Reply

Return to “General Toughbook Talk”