~Toughbooktalk~

Thanks for the info on the pads. I think that you are correct and that I should replace the pads & while I'm in there might as well replace the cmos battery as well. Some some videos on opening the 52 and you do have to get deep into it for this job! Might do some more reading on adding an emiss...

Here is my current readout with just ToughbookTalk open. chris@cf52 ~ $ sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +55.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +55.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +51.0°C (high = +86.0°C, crit = +100.0°C) acpitz-virtual-0 Adapter:...

mklym Total hours are only 9240 and the Applet I'm using is CPU Temperature Indicator by jaszhic. When running sensors the temps shown are very close within 1 degree actually. The sensors list high as being at 86 and critical as 100, with critical for the video card as being at 130 degrees centigrad...

I have a CF-52TKG101M running Linux Mint 18.3, the CPU temps seem to be running on the high side but then again maybe this is normal for this unit. It has the 1920 x 1200 screen and ATI 6750 Video card with an i5 2.6Ghz Processor and 8GB of memory. Startup temp is apx 41, browser home page apx 57, s...

While I was looking for a solution I discovered that my bios's (V4.20L11) setup utility does not have 4 settings that are indicated in the cf-19 reference manual. Wireless Switch, Wireless LAN, Wireless WAN and Bluetooth are not there, but this CF-19VMRFX2M did not come with WLAN or Bluetooth. I'm w...

My 19 is a MK4, both F1 & F2 keys work as well as the front hot keys for brightness. The other 4 keys are not yet co-operating, I got as far as being able to rotate using the terminal but can not seem to get it programmed to the rotate hot key and touch works fine as well. When I installed LM I ...

Here are those results. chris@CF-19 ~ $ lsmod | grep -i iwlwifi iwlwifi 282624 1 iwldvm cfg80211 622592 3 iwlwifi,mac80211,iwldvm On a side note, today the cf-19 connected by just cycling the wireless, it retained the other settings this time. I'm also running this same LM version on my Lenovo T420 ...

For what it's worth: https://www.cyberciti.biz/faq/linux-fin ... r-chipset/ Yeah, Thank you. I followed that direction allready as well. However, a bit of progress! now when I cycle the wireless switch and turn on the wireless settings (2) the connection is made. All my other device's see the rename...

Here is another one. I also tried the Intel microcode update but that would not connect at all wirelessly. I also downloaded the tgz file from the wiki link but so far have not been able to get it to install. I see I have a lot to learn about communicating with linux, need to find a source for the c...

chris@CF-19 ~ $ lsmod | grep wl -i iwldvm 229376 0 mac80211 778240 1 iwldvm iwlwifi 282624 1 iwldvm cfg80211 622592 3 iwlwifi,mac80211,iwldvm chris@CF-19 ~ $ I did find something here that suggests my adapter is supported, maybe I need to run that tar file. https://wireless.wiki.kernel.org/en/users/...